Ask Todd Miller *Metal Roofing Expert

Exposed Fasteners: Leaking or Condensation?

Written by Todd Miller on May 20, 2017 | Filed under: Metal Roofing,Roof Repair,Roofing Answers,Roofing Help,Roofing Installation

I am not a huge fan of exposed fasteners for roofs on residential applications. Probably 80% of the questions I receive about problems with metal roofs pertain to these types of panels. That said, I am happy to help when I can.

I recently received the following question from Jane:

Q. I noticed my inside ceiling insulation was wet in a strip on both sides of the ceiling where it appears that the screws were put in in the metal roofing. Since I know nothing about roofing, I am 80, I started to put silver tar on the roof, but only put it on half of the roof because someone told me that I needed to calk around each screw because you could see where some of the screws were crooked. What kind of calk is the best to use? Have I ruined the metal roof with the tar I put on? Thank you for your help.

Here is my response:

A. Thanks. There is a chance that what you’re seeing in the attic is due to condensation forming on the screws. The condensation would be the result of moisture inside the home reaching the attic and not being properly vented out. The condensation forms on the screw tips because they are transmitting cold from the outside. One thing you might do is wait for a rain on a warmer day and, while it’s still warm outside, check and see if the screws seem to be leaking. If not, then I am guessing this is actually condensation. If it is condensation, try to increase the attic ventilation.

If you do decide to seal the screws (keeping in mind that one option is to replace the screws with new, larger diameter screws), I would suggest some sort of quality butyl or co-ether sealant. You should still be able to seal over the screws you have coated.

Good luck and be careful!

Tags: , ,

Leave a Reply

Your email address will not be published. Required fields are marked *

About Todd

Todd's expertise comes from his years of experience in metal roofing manufacturing. As president of Isaiah Industries, based in Piqua Ohio, Todd runs a several of the world’s leading manufacturers of residential metal roofing; Classic Metal Roofing Systems, Kassel & Irons, and Green American Home. His personal goal is to educate homeowners of the long-life benefits of metal roofing.

Sometimes finding the right roofing product is the easy part.

Need help finding a local, quality metal roofing contractor or supplier? I can help.

Find a Contractor or Supplier

Thinking about a new roof?

Educate yourself for a better experience when buying a new roof

This comprehensive eBook includes everything you'll need from "choosing a manufacturer" to a "metal roofing checklist," and is sure to be a great tool for helping you make the best investment in you home’s protection.

Get your copy!
classic metal roofing systems logo kassel and irons logo kassel and irons logo